They are devised in such a manner that they will produce an equal amount of brightness with a much lower power consumption.

CFL or compact fluorescent lamps are the most popular in this category and they have been the point of focus (pardon theLed Panel Lights Manufacturerspun) of many a green campaign. The main objective is to get people to use these 7-11w bulbs instead of standard 20w-25w bulbs or higher. These bulbs are perfectly capable of producing the same amount of bright light while also bringing the electricity bill down.

The usual myth about these bulbs is that they are not as bright as the ordinary incandescent bulbs and that is absolutely not true. These bulbs are perfectly capable of being the direct replacements of all the standard light fittings around the household. The CFL bulbs come in various shapes and sizes and also have varied wattage to produce lights varying in their brightness. The usual power consumption difference between an incandescent bulb and an energy saving one is usually between 50%-70% or more. This is in favor of the energy saving bulbs of course.

There are bulbs available for standard shapes and fits that are perfect for chandelier fittings and hence will not look odd or out of place. This is very useful those who have an elaborate lighting setting already in place, like shops and display units. Another problem so far has been using these bulbs with standard dimmer switches and it used to be impossible to do until recently. There are new bulbs available that are okay to be used with standard dimmer switches and they will not strobe or flicker. Upon testing, many of these bulbs revealed that they turn off after the 30% mark but up to that mark they can be dimmed smoothly without a problem. There are some specialized bulbs that carry a manufacturer's promise for being able to handle being dimmed up to 10% and back up.

Hence, most of the common domestic uses are covered using these bulbs. Now, the usual 50W halogen spotlight can also be replaced with a specially made 11w bulb that produces the same strong spotlight with about 1/5th the power consumed. The only difference is that the halogen bulbs create a warmer, more yellowish color while the energy saving light bulb creates a more whitish light.

Another category of energy saving lights uses LEDs or Light Emitting Diodes. These are very different from every other bulb and more electronic than electrical. They have recently come to the domestic and commercial lighting scenario and are being loved for their low cost, longevity and above all – extremely low power consumption. They brightness belies the tiny amount of power that they use. This is why they are more popular in the emergency and portable lighting category. So you can find them in 3 color torches, emergency lights, etc.

Posted by: ceilingpanelss at 02:42 AM | No Comments | Add Comment
Post contains 492 words, total size 3 kb.

2016 Global Exterior Lighting Wall Light Industry Report is a professional and in-depth research report on the world's major regional market conditions of the Exterior Lighting Wall Light industry, focusing on the main regions (North America, Europe and Asia) and the main countries (United States, Germany, Japan and China).

​

The report firstly introduced the Exterior Lighting Wall Light basics: definitions, classifications, applications and industry chain overview; industry policies and plans; product specifications; manufacturing processes; cost structures and so on. Then it analyzed the world's main region market conditions, including the product price, profit, capacity, production, capacity utilization, supply, demand and industry growth rate etc. In the end, the report introduced new project SWOT analysis, investment feasibility analysis, and investment return analysis.

The report includes six parts, dealing with: 1.) basic information; 2.) the Asia Exterior Lighting Wall Light industry; 3.) the North American Exterior Lighting Wall Light industry; 4.) the European Exterior Lighting Wall Light industry; 5.) market entry and investment feasibility; and 6.) the report conclusion .

P595 x 595 Panel Light ManufacturersA

Posted by: ceilingpanelss at 02:47 AM | Comments (2) | Add Comment
Post contains 182 words, total size 1 kb.

25% of a typical home's electricity is spent on lighting inefficientincandescent light bulbs. Each year, more and more homeowners arechoosing to replace their incandescent bulbs with more efficient bulbs.Two of the most efficient energy saving light bulbs used in homes areCFL (compact fluorescent) and LED (light emitting diode) bulbs. Both ofthese bulb types have become more popular as home owners realize thegreat energy saving benefits. While CFL and LED cost more than theconventional incandescent bulbs, they prove to last much longer. YouwonÂ’t need to replace CFL and LED bulbs as often as incandescent bulbs.

CFL Bulbs
CFL bulbs are compact fluorescent bulbs that have a twisting shapeappearance. They are more energy efficient than incandescent bulbsbecause they produce less heat and last longer. They use 1/3 theelectricity and last up to 10 times as long as incandescent bulbs. Forexample, one, 18 watt CFL in place of one, 75 watt incandescent bulb,will save about 570 Kilowatts (kWh). The average cost of electricityper kWh is 8 cents per kWh. This would yield about a $45 savings forjust one1*4 panel Factorybulb (Eartheasy). Other advantages of using CFL bulbsinclude that they help reduce air and water pollution by producing lesscarbon dioxide (CO2). Replacing one incandescent bulb with a CFL canprevent as much as 450 lb. of carbon dioxide from entering theatmosphere. CFL's provide a higher quality light compared to the brightwhite light of incandescent bulbs.

Some homeowners fear using CFL bulbs because they contain small amountsof mercury. Electrical safety experts believe that the mercury in a CFLis not dangerous. The only danger associated with a CFL bulb is if itbreaks and is not cleaned up and disposed of promptly and properly.Proper clean up consists of sweeping up the glass from the bulb (do notvacuum) and disposing it in regular trash.

LED
LED (light emitting diode) bulbs are used in lamps, small lightingfixtures and for Christmas lights. They are also used in smallelectronics, such as DVD players, as well as in tiny flashlights.Nowadays, LED bulbs are being used for more residential lightingapplications, such as under-cabinet lighting, in recessed lightingfixtures and for landscape lighting applications. LED bulbs have anextremely long lifetime. They can last between 50,000 to 60,000 hours.This is more than four times longer than CFL bulbs. LED bulbs use only2-10 watts of electricity (1/3 to 1/30 of incandescent or CFL bulbs).As with CFL bulbs, LED’s don’t produce heat. According toEartheasy, “LEDs produce 3.4 BTU's/hour, compared to 85 forincandescent bulbs.” In 2009, the first LED-based replacements for atraditional light bulb were made available to the public. These bulbsgive off an amount of light equivalent to a 40-watt incandescent bulb.Most homeowners use 65 watt bulbs and higher. However, the extremelylong lifespan of LED bulbs has made them into a popular choice.

Posted by: ceilingpanelss at 02:37 AM | Comments (2) | Add Comment
Post contains 465 words, total size 3 kb.

Drop ceilings are some of the most challenging to make warm and inviting, but are also some of the easiest types of ceilings to install lighting panels into. Since dropChina 2*4 panel suppliersceilings are created on a grid system with space above them, there is plenty of work room to install the new lighting fixtures without much hassle. Drop ceiling light panels can help customize your room and can provide you with various lighting effects that add warmth and detailing to your home. Here are some answers to your common questions above these types of panels.

What Are Drop Ceiling Light Panels?

One of the most common questions that are asked by home owners is what this type of panel is. Many consumers move into a home with existing light fixtures and never think about customizing them or changing them out. Drop ceiling light panels are ceiling tiles that can easily be slipped into the place of an existing panel in your drop ceiling in order to install a type of lighting fixture.

There are a wide range of different types of panels and fixtures available and each can create its own effect and look in a specific room within your house. Installation is simple and allows you to have a variety of different fixtures in a single room. These panels will cover the light fixture instead of leaving it exposed and will allow the light to filter through.

What Are They Made Out Of?

Since drop ceilings hang from a grid system, the panels need to be relatively light weight in design. Because of this, many drop ceiling light panels are made of plastic and sometimes acrylic. The panel has to be light enough to not put stress on the grid or surrounding panels and to not fall to the ground over time.

How Big Are They?

Drop ceiling light panels are available in a wide range of sizes. The size of the panel can be customized, but they are also available in standard tile size in order to be slipped in as a replacement for a general use tile or panel. There are panels that are several feet wide and others which are only matter of inches, it all depends on what the consumer desires or needs.

What Type of Lights Are Compatible With Them?

In most cases the lights used with the clear light panels are fluorescent. Other types of lights can be used however and within a residential home, regular halogen bulbs are often used to give a softer and more natural glow to the room.

How Do You Install Drop Ceiling Light Panels?

These are among the easiest of all lighting panels to install. Since they are extremely lightweight by design, they are easy to lift into place. After you have them in place, it is a simple matter of slipping them into the grid that is already in place.

Drop ceiling light panels are a simple way to install light fixtures throughout your home for warmth and a glow that ads a homey feeling to the room. These panels are lightweight, easy to install and can be used with a variety of different types of bulbs to create unique effects.

Posted by: ceilingpanelss at 02:15 AM | Comments (2) | Add Comment
Post contains 542 words, total size 3 kb.

Lighter fluid burns with a distinctive smell. It has an oily consistency which makes it highly-prized for its being able to burn in even very windy conditions. Lighter fluid has a taste which is detectable by some individuals and not at all detectable by others. Different fluids are said to affect this characteristic, as well. Whether or not this is true is entirely up to the individual to decide. Some cigar smokers would not for a minute consider giving up their prized Zippo; others would hesitate to light a fine cigar with anything other than a wooden match or a cedar strip.

The reason Zippos remain popular for outdoor use is that they are an inherently windproof lighter. The lighter fluid used to fuel them is slow to evaporate and is thick enough that it will stick to the wick and ignite even in very windy conditions. This makes them popular with sailors and fishermen.

There are new butane lighters on the market which rival Zippos where wind resistance is concerned, however, and these may be a less-objectionable option for those who find the taste of lighter fluid something which they cannot tolerate. These windproof butane torches are available from higher-end tobacconists and lighter shops.

Whether or not the taste of lighter fluidChina 600*1200 panel Factoryis something about which one should harbor concern is entirely for the smoker to decide. Being outdoors is as much about the equipment as it is about anything else and using a Zippo has something of an adventurous feel to it. These lighters long history of reliability makes them an advantageous choice for outdoor enthusiasts. The butane models, however, are very affordable and there's nothing to say that it's a bad idea to bring along more than one lighter and to see which proves superior in adverse outdoor conditions.

Article Tags: Lighter Fluid

Posted by: ceilingpanelss at 02:53 AM | Comments (2) | Add Comment
Post contains 315 words, total size 2 kb.

The Light Industry Corrugated container Board report is offers a clear picture of the current and future trends, developments and opportunities. The report, prepared by a highly seasoned team of analysts and data experts, carries an array of tables and graphs besides qualitative analyses. Starting with a discussion on the current state of the Light Industry Corrugated container Board market, the report goes on to discuss the dynamics affecting each segment within it. The report segments the market to up to three levels and studies each of these in great detail. The result is a set of sharp insights and recommendations that will help companies stay ahead of the next new trend in the Light Industry Corrugated container Board industry.


A basic overview of the Light Industry Corrugated container Board market is offered to readers through the use of market definition, segmentation, applications, and value chain analysis. The analysis for the Light Industry Corrugated container Board market is not limited only to traditional or emerging markets. It also covers regions that have been hitherto unexplored but have white space that could be lucratively tapped. In order to do this, however, a clear understanding of one’s competitors is imperative. The report provides just that through a section dedicated to key company profiles and news. Equipped with this vital information, players in the Light Industry Corrugated container Board market will be in a better position to foresee opportunities and threats alike and make informed decisions.

The regulatory environment, being such an intrinsic part of the Light Industry Corrugated container Board market, does need special focus. The report collates information relating to current and future policies and regulations that could directly or indirectly affect business operations. The report is an invaluable business intelligence repository for new and existing players in the Light Industry Corrugated container Board market.


For technical data and manufacturing plants analysis, the report analyzes Light Industry Corrugated container Board leading suppliers on capacity, commercial production date, manufacturing plants distribution, R&D Status, technology sources, and raw materials sources.

This report also presents product specification, manufacturing process, and product cost structure etc.Production is separated by regions, technology and applications. Analysis also covers upstream raw materials, equipment, downstream client survey, marketing channels, industry development trend and proposals. In the end, the report includes Light Industry Corrugated container Board new project SWOT analysis, investment feasibility analysis, investment return analysis, and development trend analysis. In conclusion, it is a deep research report on Global Light Industry Corrugated container Board industry.

​China 2x2 panel light Factory

Posted by: ceilingpanelss at 01:23 AM | Comments (2) | Add Comment
Post contains 423 words, total size 3 kb.

Recessed lighting in the foyer or entrance hall is an effective way to showcase a curving staircase or entry floor. Recessed adjustable lighting can also add light to the areas and objects that you want to stand out. One fixture can light several areas, simply by changing the bulb from a spot to a flood or you can highlight details in a space by using spot fixtures in strategically placed areas.

In a living room, place fixtures approximately 8'- 0" apart to provide general unobtrusive light that won't clash with room furnishings. A dimmer gives adjustable light levels for any activity or occasion. Be sure to distribute the light evenly. The fixtures should be about 18" to 24" from the wall, spaced one to one-and-a-half times the distance from the wall. To highlight a textured wall or reveal wall patterns (such as a brick wall) use the grazing technique by placing fixtures 12" from the wall and 12" to 24" apart.

When adding recessed lighting to a bath, the size of the room will decide the lighting requirements. Bathrooms over 100 square feet require general light, while smaller baths can use mirror fixtures. Recessed incandescent fixtures work well and can provide general illumination for bathrooms up to 100 square feet. Place them no more than 36" apart and centered over the counter. Add fixtures for each additional 50 square feet of space. Note that wall sconces should be used in order to properly light a mirror or vanity, as using only recessed lighting in the space will shadow the face.

In shower or bath areas, recessed lighting must be approved for a damp location. Local electrical and building codes should be consulted when selecting the lighting for these areas, as specific requirements vary from state to state.

For the kitchen, recessed incandescent downlights should be placed approximately 6' to 8' apart. Fluorescent recessed fixtures are a good alternative choice, as they last ten times longer and deliver three to four times more light per watt than incandescent lighting. Plus, recessed fixtures can be hidden in niches or placed to shine through glass shelves for a unique, backlight display.

How to buy recessed lighting

Recessed lighting fixtures have three parts - the housing, the trim and a bulb. Each part is needed to complete the fixture. When you first select products, you can shop either by the housing style or by the trim. After choosing a product, such as a specific housing, you will need to scan further down the product detail page to see the compatible trims that will work with the housing you selected. Remember to make sure the housing and trim are compatible and from the same manufacturer. Then, select the type of lighting you need, such as line voltage, low voltage (with a transformer) or fluorescent. Make sure you are purchasing both a housing and a trim piece as you will need both to have a complete fixture.

Recessed lighting glossary

It always helps to know the proper terms to describe a fixture you're using. Here are definitions of some of the more common words and phrases used with recessed lighting:

Housings: Housings are recessed fixtures which can "house" a variety of line and low voltage lamp styles and wattages. These housings allow for connection to the electrical system and in conjunction with trims and bulbs create the finishedChina 620 x 620 Panel Light Factoryproduct of a recessed fixture.

Trim: Housing Trims finish off the hole in the ceiling and can play an integral part of light effectiveness or effects based on the wide range of finishes and types available. Note that a black baffle can cut light output by 50% since the color black absorbs light.

Baffle: The baffle is the interior of the trim that is recessed into the ceiling. Most baffles are stepped up with milligrooves.

Line Voltage: Fixtures that operate at 120 volts are considered line voltage lamps. They do not require a transformer and can be directly connected to the electrical wiring.

Low Voltage: Fixtures that operate at a lower voltage than line voltage are termed low voltage. These fixtures require a transformer to reduce line voltage, usually to 12 or 24 volts. Many fixtures using the smaller MR16 bulbs are low voltage fixtures.

Airtight: Meets airtight requirements to a certain CFM or less air leakage.

Wet Area: Means the fixture is U.L. listed for use in damp locations, such as a shower or certain outdoor environments.

Energy Star: The fixture uses less energy than incandescent fixtures and is Energy Star Rated.

Shower Trim: Trim suitable for a shower light. Shower trim must also use a housing that is approved for damp locations.

Eyeball: This trim is a versatile lamp for art lighting. It can be swiveled left to right as well as aimed up from vertical on a wall. It does protrude below the ceiling line, and so would be more visible.

New Construction Fixture: The fixture is suitable for installation in an open wall construction (no sheet rock or plaster) where full access to ceilings, walls, and floors make no hindrance to installation. Fixture typically includes bar hangers to attach to floor joists, and the housing is bulkier than a remodel fixture.

Remodel Fixture: The fixture is suitable for installation in a remodel or renovation of an existing structure. The fixture is less bulky than new-construction fixtures in order to be fitted into an existing ceiling. Note there still may need to be removal of sheetrock or large holes in the ceiling made in order to accommodate a new lighting plan. An expert electrician should be consulted on how much demo work is needed in order to add a remodel fixture to an existing space.

IC Rated (Insulation Contact Rated): This means the fixture is U.L. listed for use in direct contact with thermal insulation.

Non IC Rated (Non Insulation Contact Rated): The fixture does not meet standards for use in direct contact with thermal insulation. Insulation must be kept at least 3" away from the housing.

Article Tags: Recessed Lighting, Square Feet, Recessed Fixtures, Line Voltage

Posted by: ceilingpanelss at 02:09 AM | Comments (2) | Add Comment
Post contains 1024 words, total size 7 kb.

John invented his own form of 'Painting with Light' (a very different and original 'special effect technique), without using any computer, darkroom chemicals, or expensive equipment to create his unique top international award winning pictures.

His technique is pure photography on film and has nothing to do with moving lights to make light graffiti, or of lighting specific parts of a dark scene with a long exposure. What it does involve is the photographing of projected images on to other things.

John has found that the projector really lives up to its earlier name - 'The Magic Lantern', as what can be done with projectors for photographers really is magical!

One of his best known pictures was titled 'Spirit of Spring', this was the first ever picture taken on Kodachrome (transparency film) thatChina slim panel lights suppliersincluded both a negative of a tulip and a positive image of a girl's portrait, all on the same emulsion!

No one knew, at the time, how this could be possible, as it was created well before anyone had the use of computers.

This little known technique involves the photographing of projected images, sometimes; he projected his image through a crystal, or reflected the projected image off various reflective surfaces, or through coloured cellophane, the projected image could be a negative (colour or black and white) and he even used three or four projectors all together at times. His chosen screen often became the subject of the picture, John has photographed projected images on to a shell, a flower, a butterfly wing, even the edges of the pages of a book!

His freely available article titled 'The Magic Lantern' fully describes and explains exactly how anyone and everyone can do it. 'The Magic Lantern' can be found at:

Digital camera users could also use most of his techniques, as these special effects have certain qualities that are a little different from those achievable by digital manipulation.

'Spirit of Spring' won The London Salon Trophy in 1967; this was then the first time a colour picture was deemed worthy of this much coveted trophy, for it had only ever been awarded before for Black and White photographs, John was also the youngest member to have won it.

There have been over 20 One-Man Exhibitions of John's photography (many were sponsored by Kodak) at major venues; 2 were held in New York, 4 in London, The Edinburgh Festival and many other UK and USA cities.

Favourable reviews and comments were received about John's pictures from; Cecil Beaton C.B.E., Sir William Russel Flint R.A., Lady Clementine Spencer-Churchill, Sir George F. Pollock Bt., M.A., F.R.P.S., F.R.S.A., 'The Times' and 'Arts Review' to name a few!

John is currently creating new pictures "I use pure photography to express ideas, or thoughts, rather than reality. I trust that my pictures will intrigue, cause interest and be appreciated as very original art works that make quite a statement."

Posted by: ceilingpanelss at 01:37 AM | Comments (2) | Add Comment
Post contains 497 words, total size 3 kb.